DP PP is intended for the creation of a base before concreting the foundations. It is a formwork system specially designed for creating footings. Offered sizes: Length: 2000mm. Height: 250 mm, Width: 400; 500; 600; 700 (concrete part). Formwork consists of two sheets of EPS (foamed polystyrene), each 50 mm thick, which performs the function of holding the concrete, and a metal reinforcement mesh that connects these sheets to each other, ensuring the invariance of the formwork dimensions. Assembly: Prepare, level the foundation at least 100 mm wider in the place where the construction of the foot of the foundation is planned. Place the foot molds of the foundation, connecting them together with the nail plates. Insert the necessary fittings. From the outside, the mold is covered with sandy soil and lightly compacted. If necessary, strengthen with boards. Perform concrete filling.    

The template system of the load-bearing walls consists of 1.2 m wide templates which can be made with various insulation and polystyrene foam thickness and element length. The template consists of a specially prepared armature carcass and EPS material attached on both ends. The reinforcement serves for two purposes – ensures the required distance between polystyrene foam plates and serves as a concrete reinforcement. The distance of thermal insulation plates can be changed, achieving the desired concrete layer thickness (from 120 to 300 mm). The armature structure consists of longitudinal reinforcement (with diameter of 8, 10 and 12 mm), cross-section reinforcement with 5 mm diameter and diagonal reinforcement with 3 mm diameter. The internal part of the polystyrene foam templates is 50 mm thick, but the external part thickness can be changed depending on the designed thermal technical specifications.